Using Your Printer with a Macintosh
49
Scanning
You can scan docoments using
Image Capture
. Macintosh OS
offers
Image Capture
, you do not need to install other TWAIN-
compliant softwares.
1
Make sure that your machine and computer are turned on
and properly connected to each other.
2
Load the document(s) face up into the DADF (or ADF). OR
place a single document face down on the document glass.
3
Start
Applications
and click
Image Capture
.
N
OTE
: If
No Image Capture device connected
message
appears, disconnect the USB cable and reconnect it. If the
problem persists, please refer to the
Image Capture
’s help.
4
Set the scan options on this program.
5
Scan and save your scanned image.
N
OTE
:
• For more information about using
Image Capture
, please
refer to the
Image Capture
’s help.
• You can also scan using TWAIN-compliant softwares, such as
Adobe Photoshop.
• Scan process differ according to TWAIN-compliant
softwares. Please refer to the user’s guide of the software.
• When scanning does not operate in
Image Capture
, update
Mac OS to the latest version.
Image Capture
operates
properly in Mac OS 10.3.9 or higher and Mac OS 10.4.7 or
higher.
To Next Page
Loading...
