What to do if the “NO HDD” icon and error message appear on my Samsung SDS-P5101?
If the “NO HDD” icon and an error message are displayed, first check the HDD connection. If the problem persists, even with a normal connection, it is recommended to contact the nearest service center to have the HDD checked by service personnel.
How to turn off the alarm on my Samsung SDS-P5101 when the [ALARM] button doesn't work?
If you press the [ALARM] button on the remote control to release the alarm, but it does not work, try the following steps using the [MENU] button on the remote control: 1) To release the event monitoring mode: Go to Monitoring Mode and set the duration of the event monitoring to Off. 2) To release the alarm sound: Go to Event Record Mode - Alarm (Motion Detection/Video Loss) and deactivate the alarm sound. 3) To release the event: Go to Event Record Mode - Alarm (Motion Detection/ Video Loss) and set the mode to Off.
Why do some channels show a black screen on my Samsung SDS-P5101, even with a video source?
If some channels display only a black screen, even when they should be receiving video, check if the camera connected to the system properly displays the image and check if the camera is properly supplied with power. The issue might also occur on a channel with a weak video signal. In this case, input the video source of the camera directly into the DVR to potentially identify and resolve the problem.
What to do if my Samsung SDS-P5101 does not turn on?
If the system does not turn on and the indicator on the front panel does not work, check if the power supply system is properly connected and check the system for the input voltage from the power source. If the problem continues, check the power supplier and replace it if needed.
Why is my Samsung DVR not recording?
If recording does not work, first check if you see an image on the screen. If the player does not display a Live image at all, it may be the reason. If the recording settings are not properly configured, you can start manual recording by pressing the [REC] button on the remote control. You can also set up a scheduled record by specifying a desired time in Menu – Record - Recording Schedule. Recording will then start at the specified time.
How to improve the recording quality on my Samsung DVR?
If the image quality of your recording data is not good, increase the resolution and quality level in Menu – Record – Quality / Resolution. Also, specify a bigger size when specifying the recording size and specify a bigger level for the recording quality.
What to do if the record button doesn't work on my Samsung SDS-P5101 DVR remote?
If the [REC] button on the remote control doesn't start recording, check if there is free space on the HDD for recording. Also, check if the record mode is set to ON in the record mode setting.
Why doesn't the channel button work on my Samsung DVR?
If the Channel button does not work on the Live screen, it may be because the current screen is in the event monitoring mode. In the event monitoring screen, press the [ALARM] button to exit the screen and then select a channel.
How to display the time bar in search mode on a Samsung SDS-P5101?
If the time bar is not displayed in Search mode, switch to normal mode or use the left or right button to navigate through the time bar.
Why can't I move the cursor to the Start button in the calendar search on my Samsung DVR?
If the cursor will not move to the Start button when you start the calendar search, check if the channel and the date that you want to play are marked with the V symbol.
General| Model | SDS-P5101 |
|---|---|
| Type | DVR |
| Video Output | HDMI, VGA |
| Audio Output | 1 channel |
| Compression Format | H.264 |
| Operating System | Embedded Linux |
| Network Interface | Ethernet |
| Remote Access | Yes |
| USB Ports | 2 |
| Power Supply | DC 12V |
Provides crucial safety guidelines before operating the unit.
Outlines important notices and prerequisites before beginning.
Lists the key features and capabilities of the DVR system.
Details all items included in the product package.
Identifies front panel components and their functions.
Identifies rear panel components and their functions.
Explains the functions of each button on the remote control.
Provides essential installation guidelines and environmental precautions.
Guides on connecting video, audio, USB, cameras, RS-485, and network devices.
Guides on establishing network connections via Ethernet, router, or ADSL.
Provides initial steps for starting and safely shutting down the system.
Describes login procedures and button locking for DVR access.
Explains icons, status indicators, and menus on the live viewing screen.
Describes live view modes (split, single) and controls like zoom and freeze.
Explains how the system displays channels during specific events.
Allows configuration of system properties, date, time, language, and permissions.
Configures camera, storage, PTZ, and monitor settings.
Configures recording schedules, quality, options, and event triggers.
Configures motion detection, video loss, and alarm schedules.
Configures network connections, protocols, DDNS, and mail services.
Explains how to adjust PTZ camera settings and control them.
Explains how to search recorded data by time, event, backup, or motion.
Explains how to play recorded data from HDD or backup and use playback controls.
Provides an overview of the Web Viewer functionality and features.
Guides on connecting and using the Web Viewer on Mac and Windows.
Allows remote configuration of DVR settings and controls playback.
Guides on capturing, printing, and recording live screens to a PC.
Introduces the mobile application for connecting to the DVR.
Explains how to play backup files in SEC format.
Details the functions of playback controls like audio, speed, and zoom.
Lists detailed specifications for the DVR and cameras.
Lists the factory default settings for the DVR.
Provides solutions for common system issues and symptoms.
Details the open-source licenses used in the product.
To Next Page
