10
· Overview
Getting to know your Monitoring system
Wireless Monitor
After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.
Front Controls
SEW-3036W
Monitor Antenna
Receives and sends signals from or to the camera.
3.5” LCD Screen
Displays video from the camera.
Sound Level LEDs
Flashes when sound is detected.
MENU Button
Press to access from video monitor mode to menu
mode operation. In menu mode, press this button will go
back to monitor mode with save from selection.
SLEEP Button
Used to turn on / off the screen by press this button.
User can turn on the video again by pressing any buttons.
Microphone
Transmits audio to the camera when [TALK] button is
pressed down and held like a walkie talkie.
Navigation Controls / OK/ZOOM Button
Use the controls to move and select while in Viewing
Mode, Menu Mode and Zoom Mode.
Power LED
Indicator turns green when powered.
When battery is charging, this LED will in green color.
Button
Viewing Mode: The following controls are used while watching live video from the camera:
• Press the [$] or [%] buttons to increase or decrease the volume.
• Press the [+] button to switch to the next connected camera’s screen.
• Press the [
] button to confirm the menu selection.
Zoom Mode: While in zooming, use [$/%/_/+] button to move the screen around.
To Next Page
General
