How to reset my Samsung SNH-V6410PN Baby Monitor camera password?
To reset your Samsung Baby Monitor camera password, press and hold the reset button on the camera for over 10 seconds. This will restore the camera to its factory default settings.
What to do if I forgot my Samsung SNH-V6410PN Baby Monitor user ID or password?
If you forgot your user ID or password for your Samsung Baby Monitor, go to “Log-in page ? Forgot your ID/Password?” and enter the registered e-mail address. Your user ID and/or a new password will be sent to this e-mail address.
What to do if my Samsung SNH-V6410PN camera is not connected to the wireless hub?
If your Samsung Baby Monitor camera is not connecting to the wireless hub: * Ensure the camera is close to the wireless hub and try connecting again, as the installation location might not be optimal for wireless internet. * Double-check the wireless hub password and try again.
How to change my Samsung SNH-V6410PN password or email address?
To change your password or email address for your Samsung Baby Monitor, log in to your account. Then, click on , select the item you want to change (password or email address), and enter your new information.
What to do if I failed to register my Samsung SNH-V6410PN camera after logging in?
If you are unable to register your Samsung Baby Monitor camera after logging in, please check the following: 1. Verify that the serial number you entered matches the label on the camera. 2. Ensure you're entering the correct password for the camera and try registering again. 3. Check the camera LED to see if it is yellow or light green. 4. If problems persist, reset the camera to factory settings and begin the registration process again.
Why is my Samsung Baby Monitor camera connecting in relay mode?
Your Samsung Baby Monitor camera might be connecting in relay mode due to the following reasons: * Check the UPnP setting of the router. * It is recommended to have a network upload speed of 700Kbps or higher. * Depending on your service provider's policy, access might be in relay mode.
What to do if there is no sound output from my Samsung SNH-V6410PN video?
If there is no sound output from the video of your Samsung Baby Monitor, it may be because some internet service providers do not support audio outputs in relay mode. To resolve this, click the Voice icon on the video playback page, or check if the voice is turned On in your smart phone app.
What to do if the video from my Samsung Baby Monitor camera is temporarily lost?
If the video from your Samsung Baby Monitor camera is temporarily lost, ensure that the camera is installed in a location with good wireless Internet communication.
General| Night Vision | Yes |
|---|---|
| Two-Way Audio | Yes |
| Digital Zoom | 4x |
| Wi-Fi Connectivity | 802.11 b/g/n |
| Mobile App Support | Samsung SmartCam App |
| Camera Resolution | 1920 x 1080 (1080p) |
| Field of View | 130 degrees |
Precautions and steps for installing the camera.
Detailed steps for mounting the camera on a wall with a bracket.
Covers precautions and steps for connecting the camera via Wi-Fi.
Explains the camera registration process via smartphone.
Details on viewing live video feed from the camera.
Explains various monitoring features and their functions.
Steps to update the camera's firmware.
Lists technical specifications of the camera.
Solutions for problems with video loss or no sound.
Steps to recover forgotten IDs, passwords, or change account info.
To Next Page