25
Add and nd contacts
The memory location to save new contacts may
be preset depending on your service provider.
To change the memory location, in Menu mode,
select Contacts→Contact settings→Save new
contacts to→amemorylocation.
To add a new contact
In Idle mode, enter a phone number and press 1.
the Confirm key.
Selectamemorylocation(ifnecessary)→2. New.
Select a number type (if necessary).3.
Enter contact information.4.
Press <5. Options>→Save to add the contact to
memory.
To nd a contact
In Menu mode, select 1. Contacts→Contacts.
Enter the first few letters of the name you want 2.
to find.
Select the contact’s name from the contact list.3.