112
Section 9
• Weight
• Volume
• Area
• Temperature
Timer
You can use this menu to set a timer. To enable the Timer,
use the following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the Start soft key to start the timer. Press the Stop
soft key to stop the timer.
Stopwatch
You can use this menu to use a stop watch. Press the OK
soft key to start the stopwatch. Press the Reset soft key to
erase all stop watch times recorded. Press the OK soft key
for the lap time. You can have up to 4 lap times.
e335.book Page 112 Tuesday, April 26, 2005 9:12 AM
To Next Page
Loading...
