SAMSUNG | 31
5
INSTALLATION
5-2. Installation Diagram of Indoor Unit and Outdoor Unit
125 mm
or more
300 mm or more
125 mm
or more
600 mm
minimum
300 mm
minimum
300 mm
minimum
600 mm
minimum
15metres
maximum
7metres maximum
Installation Diagram of Indoor Unit and Outdoor Unit
Cut the piping hole
sloped slightly
A
Indoor unit gas leak test
Vinyl tape
Piping
Indoor unit
B
Drain hose installation
Cut the piping hole
sloped slightly
Piping may be laid to the rear, left, right or down.
• Wrap the refrigerant pipes and the drain hose up
in the absorbent pad and the vinyl tape.
• Triply wind the pipes and hose to the end of the
indoor unit with the absorbent pad (make intervals
of 20mm)
* The designs of the unit and Connection value are
subject to Change according to the model.
Right
Rear
Rear
Left
3
1
2
DB98_16444A(1)_1 2/9/04 10:04 AM Page 31
To Next Page
Loading...
