SAMSUNG | 41
INSTALLATION
5
5-3. Performing Leak Tests
●
Before completing the installation (insulation of the cable, hose and piping and fixing of the indoor unit to the
installation plate), you must check that there are no gas leaks.
Performing Leak Tests
To check for gas leaks on the... Then, using a leak detector,
check the...
Indoor unit Flare nuts at the end of sections
C and D.
Outdoor unit Valves on sections A and B.
CD
B
A
❊ The designs and shape are subject to
change according to the model.
DB98_16444A(1)_1 2/9/04 10:04 AM Page 41
To Next Page
Loading...
