Samsung SH09AS2 - Page 55

54 | SAMSUNG
FEATURES & OPERATION
6
Details for Operation Property (cont.)
6-2-6. Energy saving operation control
● In case of Cooling Only model
● The Energy saving mode is applicable to only in both the COOL mode and AUTO mode.
(In case of Heat Pump model : The Energy saving mode is applicable to only in the COOL mode.)
◆ Energy saving operation specification
- If you select the Energy saving mode during automatic operation, the setting temperature(Ts) will be fixed to "the standard value
+2°C"(26°C).
- If you select the Energy saving mode during cooling operation, you may set the room temperature from "26°C to 30°C",
but if you hope to control the room temperature below 26°C in the Energy saving mode, the room temperature will be compelled
to be 26°C.
- If you select the Energy saving mode, the up/down louver will enter the "Swing" status.
- OPERATION PATTERN A : In the Energy saving mode when Room Temperature(Tr) equals to the Setting
Temperature(Ts) or over.
- OPERATION PATTERN B : In the Energy saving mode when Room Temperature(Tr) is below the Setting
Temperature(Ts).
Tg +ß
Tg
Temperature
Energy saving
mode
General operation mode
Energy saving mode starting
→
Ts+1
Ts
OFFON
Time
COMP_or
Tg +ß
Tg +ß
Tg
Tg←Tg+α
Tg←Tg+α
Temperature
Energy saving
mode
General operation
mode
Energy saving
mode starting
Energy saving
pattern mode B
Change the Energy saving
pattern A.
→
→
Energy saving Ts+1
Energy saving Ts
Tr
Ts
OFF
ON
Time
COMP_or
DB98_16444A(1)_1 2/9/04 10:04 AM Page 54