Wireless network (ST150F/ST151F/ST152F only)
120
Sending photos using Wi-Fi Direct
When the camera connects via a WLAN to a device that supports the Wi-Fi Direct function, you can send photos to the device. This feature may not be supported on some
devices.
5
On the device, allow the camera to connect to the device.
•
The photo will be sent to the device.
•
You can send up to 20 les at a time.
•
When there are no les in the camera memory, you cannot use this feature.
•
If you cannot connect to a Wi-Fi Direct device, update the device with the latest
rmware. This feature may not be supported on some devices.
1
On the device, turn on the Wi-Fi Direct option.
2
On the camera, in Playback mode, scroll to a photo.
3
Press [
m
], and then select Share(Wi-Fi) → Wi-Fi Direct.
•
When in the single image view, you can send only one photo at a time.
•
When in the thumbnails view, you can select multiple photos by scrolling
to thumbnails, and then pressing [
o
]. Select Next when you are nished
selecting photos.
4
Select the device from the camera’s list of Wi-Fi Direct devices.
•
Ensure that the device's Wi-Fi Direct option is turned on.
•
You can also select your camera from the device's list of Wi-Fi Direct devices.
To Next Page
Loading...
