Capturing photos
Basic functions
39
Reducing camera shake (DIS)
Reduce camera shake digitally in Shooting mode.
Before correction
After correction
1
In Shooting mode, press [
m
].
2
Select DIS.
3
Select an option.
Icon Description
O: DIS is deactivated.
On: DIS is activated.
•
DIS may not function properly when:
-
you move your camera to follow a moving subject
-
you use the Digital zoom
-
there is too much camera shake
-
the shutter speed is slow (for example, when you capture night scenes)
-
the battery is low
-
you capture a close-up shot
•
If the camera is hit or dropped, the display will be blurry. If this occurs, turn o
the camera, and then turn it on again.
•
DIS is available in Program mode only.
To Next Page
Loading...
