Settings menu
Settings
136
* Default
Item Description
Display
Brightness
Adjust the brightness of the screen.
(Auto*, Dark, Normal, Bright)
Normal is xed in Playback mode even if you have selected
Auto.
Quick View
Set whether or not to review a captured image before returning
to the Shooting mode. (O, On*)
This feature does not work in some modes.
Power Save
If you perform no operations for 30 seconds, the camera
automatically switches to Power save mode. (O*, On)
In Power save mode, press any button other than [
X
] to resume
using the camera.
Connectivity
* Default
Item Description
Anynet+
(HDMI-
CEC)
Turn on to control the camera with a TV remote control when you
connect it to an HDTV that supports the Anynet+(CEC) prole.
•
O: View les without using an HDTV remote control.
•
On*: Control the camera with an HDTV remote control.
HDMI Size
Set the resolution of photos when the camera plays back les on an
HDTV via the HDMI cable.
(NTSC: 1080i*, 720p, 480p/ PAL: 1080i*, 720p, 576p)
If the HDTV does not support the selected resolution, the HDTV
automatically selects the next lower resolution.
Video Out
Set the video signal output for your region.
•
NTSC: USA, Canada, Japan, Korea, Taiwan, Mexico, etc
•
PAL (supports only BDGHI): Australia, Austria, Belgium, China,
Denmark, England, Finland, France, Germany, Italy, Kuwait,
Malaysia, Netherlands, New Zealand, Norway, Singapore, Spain,
Sweden, Switzerland, Thailand, etc
i-Launcher
Set i-Launcher to launch automatically when you connect your
camera to your computer. (O, On*)
To Next Page
Loading...
