Using the Magic Plus mode
Extended functions
57
Using the Split Shot mode
In Split Shot mode, you can capture several photos and arrange them with preset
layouts.
1
Rotate the mode dial to
g
.
2
Select .
•
To select another mode when the mode dial is set to
g
, press [
b
] or touch
, and then select a mode.
3
Select a split style.
•
To adjust the sharpness of the dividing line, press [
m
], and then select
Line Blur a value.
•
To apply a Smart Filter eect to part of the shot, press [
m
], and then
select Smart Filter an option. You can apply dierent Smart Filter eects to
each part of the shot.
•
To adjust the size of the frame, drag the dividing line. Touch or the split
style again to discard your changes.
OK: Panel O
4
Align your subject in the frame, and then half-press [Shutter] to
focus.
5
Press [Shutter] to capture a photo.
•
Repeat steps 4 and 5 to capture the rest of the photos.
•
To recapture a photo, press [
b
].
•
The resolution is set to or smaller.
•
The available zoom range may be less than in other shooting modes.
To Next Page
Loading...
