Scanning for Available Channels
Broadcasting > Auto Tuning
Try Now
"
Availability depends on the specific model and area.
Automatically scans and indexes all channels received through the TV's antenna input connector.
"
If there are saved channels, this feature deletes the existing list and then saves the newly scanned channels.
If the TV is connected to a cable box or satellite receiver, you do not need to do this.
1.
Select Broadcasting > Auto Tuning.
2.
Select Start when prompted. This initiates the Auto Programme function. The process can take up
to 30 minutes to complete.
●
Auto Tuning
Scans for channels automatically and stores them in the TV’s memory.
●
Cable Search Option (when the aerial was set to Cable)
"
Availability depends on the specific model and area.
Sets additional search options such as the frequency and symbol rate for a cable network search.
●
Standby Auto Tuning
"
Availability depends on the specific model and area.
Auto-tune channels while your TV is in standby mode.
●
Wake-up Timer
"
Availability depends on the specific model and area.
Schedule timer to turn the TV on and scan channels automatically.
Aerial Connection Type
Broadcasting > Aerial Connection Type
Try Now
Choose your aerial connection type Dual or Single.
"
This function is available when Aerial is set to Satellite.
"
Availability depends on the specific model and area.
To Next Page
Loading...
Need help?
General
