Samsung SmartThings ADT Carbon Monoxide Alarm User Manual

ADT Carbon
Monoxide Alarm
Setup Guide
PRINTER’S INSTRUCTIONS:
MANUAL,QUICK START,NOVA,CO - NORTEK P/N: 10015712B- INK: BLACK PLUS PMS 286C - MATERIAL: 105G COATED PAPER - SIZE: 105MM X 105MM - SCALE:
1-1 - BINDING: TRIM, FOLD AND SADDLE STITCHED - PAGE 1 OF 32

Samsung SmartThings ADT Carbon Monoxide Alarm Specifications

General

Brand	Samsung
Model	SmartThings ADT Carbon Monoxide Alarm
Category	Security System
Language	English

Summary

Setup

Initial Setup Considerations

Prepare the alarm and ADT Security Hub for pairing by placing the alarm and ensuring the hub is disarmed.

SmartThings App Pairing Process

Use the SmartThings app to scan the QR code and follow prompts to add the carbon monoxide alarm.

Placement

Mounting

Mounting Base Installation

Install the mounting base securely using screws and anchors, ensuring proper distance from walls.

Alarm Attachment and Power-Up

Fit the alarm onto the base by aligning and twisting clockwise until it clicks, observing LED flash.

Post-Mounting Test Procedure

Test the alarm functionality immediately after completing the mounting and installation process.

Testing

Troubleshooting

Alarm Not Sounding

Steps to take if the carbon monoxide alarm does not sound when the test button is pressed.

Resetting the Alarm

Instructions for resetting the ADT Carbon Monoxide Alarm if it did not pair successfully with the ADT Security Hub.

Use

Suggestions

Works With SmartThings