English _47
● SETUP SCREEN
To set the privacy zone
You can specify a certain area of the camera video to be protected for your privacy.
1. Set it to <On>.
2. On the video screen, click a vertex of
the selected area to display the dialog
as shown.
3. Provide a name and color.
Then, press [OK].
4. If you want to delete an area, select
that area in the list and press [Delete
( )].
5. When done, click [Apply (
)].
Camera setup
You can change the camera settings according to the environment where the camera is
located.
1. From the Setup menu, select the
<
Video ( )> tab.
2. Click <Camera setup>.
3. Configure the settings as necessary
of : SSDR, White balance, Backlight,
Exposure, Special, OSD, Time OSD
4. When done, click [Apply (
)].
If a certain time (timeout: 240s) is elapsed with
your not pressing the [Apply (
)] button
after changing the settings, your changes will
not be applied.
To Next Page
Loading...
