overview
12_ overview
Inside
Item Description
Network Port Used to connect a PoE or LAN cable.
b
Alarm In / Out
terminals
Alarm in/out terminals can be confi gured as follows:
- ALARM IN : Terminal for Alarm Input.
- ALARM OUT : Terminal for Alarm Output.
- GND : Grounding terminal.
c
SD Memory Card
Compartment
Compartment for the SD memory card.
Reset Button
Resets the camera settings.
Press the button for about 3 seconds, and the system indicator turns off
and will restart.
J Resetting the camera requires reconfi guration of network settings (IP
address, subnet mask, gateway address etc.) using the IP Installer
software application.
3
4
To Next Page
Loading...
