English _25
● CAMERA SETUP
WHITE BAL
If you need to adjust the screen brightness, use the WHITE BALANCE function.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
Select <CAMERA SET> - <WHITE BAL>.
Select a mode where you set the balance.
DAY : You can set the RED, and BLUE value
in DAY mode.
NIGHT : You can adjust the <WHITE BAL>
according to the ambient luminance.
According to the specifi ed recording mode,
select a WHITE BAL mode with necessary
options.
BRIGHTNESS : Specify a brightness level
triggering the switch from DAY to NIGHT
mode.
MODE : According to the selected mode,
you can adjust the RED and BLUE color
level.
RED : Adjust the strength of the red color.
BLUE : Adjust the strength of the blue color.
R-GAIN/B-GAIN : Specify the current color temperature manually.
You can set the R-GAIN, and B-GAIN value only in AWC mode.
DIGITAL ZOOM
You can set the digital zoom factor and position.
When the zoom factor and position are defined, the digital zoom function will operate.
If you set the digital zoom to a larger factor than the actual enlargement for compensation, the DIS
function will be disabled.
DETAIL
You can adjust the vertical and horizontal sharpness, respectively.
1.
2.
y
y
3.
y
y
-
-
-
To Next Page
Loading...
