Samsung SND-3080CF - Direct Connection to DHCP Modem

32_ network connection and setup
network connection and setup
Follow the instructions below if you select <Use the following IP address>:
ex1) If the address (LAN IP) of the
Broadband Router is 192.168.1.1
IP address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
ex2) If the address (LAN IP) of the
Broadband Router is 192.168.0.1
IP address: 192.168.0.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
ex3) If the address (LAN IP) of the
Broadband Router is 192.168.xxx.1
IP address: 192.168.xxx.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.xxx.1
For the address of the
Broadband Router, refer to the product’s documentation.
CONNECTING THE CAMERA DIRECTLY TO A DHCP-
BASED XDSL/CABLE MODEM
Setting the Broadband Router
This is enabled for a modem using DHCP.
Set the Static or Dynamic IP address. (pages
35~38)
Launch an Internet browser on the local PC connected to the Broadband Router.
Enter the Broadband Router’s address in the address bar of the browser.
ex) http://192.168.1.1, http://192.168.0.1 or http://192.168.xxx.1
For the DDNS URL address, refer to "To check the DDNS address". (page
42)
y
M

1.
2.
3.

SND-3080CF
External Remote PC
DDNS Server
(Data Center, KOREA)
xDSL or
Cable Modem
INTERNET