Samsung SND-3080CF - Object Counting Functionality and Rule Definition

setup screen
64_ setup screen
To set the object counting function
Click the <Event> - <Object counting>.
The Object Counting Confi guration
window is displayed.
To enable the object counting function,
select the <Enable> for the <Object
counting function>.
To display the line crossing or the area
occupancy in the monitoring video,
select the <Enable> for <Overlay>.
Set the Sensitivity for object detection.
Set the Line Crossing or the Area
Occupancy.
Set the Activation Time.
To set the object counting rules
Select your desired rule to set between
the <Line Crossing> or <Area
Occupancy>.
Set the line or area for the object
counting rule.
Setting the line : Select the <Line
Crossing>, and then click your left
mouse button to draw the line in the
monitoring image in confi guration screen.
If you complete drawing the line, click your right mouse button. Select one of the
lines displaying object motion directions in the dialog box, and then click the [OK]
button.
1.
2.
3.
4.
5.
6.
1.
2.
y