How to fix Samsung SND-5011 access from a web browser?
If you cannot access the Samsung Security Camera from a web browser, ensure the camera's Network settings are correct, all network cables are properly connected, and, if using DHCP, the camera obtains dynamic IP addresses without issues. If connected to a Broadband Router, verify that port forwarding is correctly configured.
What to do if the Samsung Security Camera is not detected in the IP installer program?
If your Samsung Security Camera, connected to the network, isn't detected by the IP installer program, try turning off the firewall settings on your PC and then search for the camera again.
Why does my Samsung SND-5011 Security Camera viewer disconnect during monitoring?
If your Samsung Security Camera viewer gets disconnected during monitoring, check all network connections. Also, if the camera is connected over a PPPoE network, disconnections can occur under poor network conditions.
Why do Samsung SND-5011 Security Camera images overlap?
If images from your Samsung Security Camera overlap, check whether two or more cameras are set to a single multicast address instead of different addresses.
General| Brand | Samsung |
|---|---|
| Model | SND-5011 |
| Category | Security Camera |
| Language | English |
Read and follow all safety instructions for proper and safe operation of the camera.
Step-by-step guide for installing the camera, including disassembly and mounting.
Step-by-step guide for installing the camera, including disassembly and mounting.
Guide on connecting the camera to a local network and accessing it from a PC.
Steps to connect the camera to a DSL/Cable modem using DHCP.
Steps to connect the camera to a PPPoE modem.
Guide for configuring the camera when connected via a broadband router.
Detailed instructions for configuring static IP addresses for the camera.
Explains how to set up and check dynamic IP configurations for the camera.
Guide on setting up port forwarding on a router for remote camera access.
Guide on accessing the camera remotely over the internet using DDNS or router IP.
Details on how to log in to the camera's web interface using default credentials.
Configures video settings, including resolution, framerate, and profiles for different conditions.
Configures network connection types, IP addresses, and DNS settings.
Configures motion detection zones, sensitivity, and object size parameters.
Solutions for problems accessing the camera via a web browser.
Troubleshooting steps for unexpected viewer disconnections.
To Next Page
