EasyManua.ls Logo

Samsung SND-6084R - General Warnings and Cautions

Samsung SND-6084R
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NETWORK WIRING DIAGRAM
WIRING INSTRUCTIONS
J
The CVBS out terminal of the product is provided for easier installation, and is not recommended
for monitoring purposes.
If both PoE and DC 12V are applied simultaneously, the product will be supplied with power from
PoE. (SND-6084R)
- You can also use a router featuring PoE to supply power to the camera.
- Use PoE that is compliant with the IEEE 802.3af protocols.
- It is advisable to use only one power source from PoE and DC 12V.
When connecting PoE and DC 12V, or PoE and AC 24V at the same time, the unit starts operation
with the first connected power. (SNO-6084R/SNV-6084R)
- You can also use a router featuring PoE to supply power to the camera.
- Use PoE that is compliant with the IEEE 802.3af protocols.
The heater will operate properly only by the power source of AC 24V. (SNO-6084R/SNV-6084R)
- The heater does not work with DC 12V, PoE.
- Use AC 24V in a low-temperature place of less than -10°C.
Be careful not to reverse the polarity when you connect the power cable.
If you want to connect an external device, you must turn off the external device before proceeding.
Camera
Camera
Local PC
Broadband
Router
PPPoE or
Cable Modem
PPPoE or
Cable Modem
External Remote PC
DDNS Server
(Data Center, KOREA)
INTERNET
4_ English

Other manuals for Samsung SND-6084R

Related product manuals