Port Range Forward (Port Mapping) Setup
From the Setup menu of the Broadband
Router, select <Applications &
Gaming> - <Port Range Forward>.
b Select <TCP> and <UDP Port>
for each connected camera to the
Broadband Router.
Each port number for the Broadband
Router should match that specified in
<Setup> - <Network> - <Port> from
the camera’s web viewer menu.
c When done, click [Save Settings].
Your settings will be saved.
M
Above sample instructions are based on the CISCO’s Broadband Router.
The settings may differ depending on the connected Broadband Router model.
For more information, refer to the user manual of the applicable router.
Port forwarding can be done without additional router setup if the router supports the UPnP
(Universal Plug and Play) function.
After connecting the network camera, set <Quick connect> of <Samsung DDNS> to <On> in
the “Setup
Network
DDNS” menu.
Registering with DDNS
1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered
account.
2. From the top menu bar, select <DDNS SERVICE> - <MY DDNS>.
3. Click [PRODUCT REGISTRATION].
4. Please enter the product ID and fill in the items displayed.
5. Click [REGISTRATION].
Connecting the camera to Samsung DDNS
On the Live screen of the camera, click
[Setup (
)].
b Select <Network ( )>.
c Click <DDNS>.
From the DDNS setup page, set
<DDNS> to <Samsung DDNS>.
Provide the <Product ID> that you
registered product ID with the DDNS
site.
Click [Apply (
)].
When the connection is successfully made, you will see the message of <(Success)>
on the screen.
8_ English
b
c
b
c
To Next Page
Loading...
