2. If you access it as an admin, the
following screen will be displayed. Click
the [Control Panel].
3. Click the <Shared Folder> in the file
sharing and privilege menu.
4. Click the [Create] button.
5. After entering the shared folder
name(ID), click the [OK] button to
create a shared folder.
In this example, the shared folder name
is [testDirectory].
6. In Windows, for NAS access, set
the privilege for the shared folder as
follows.
Check the admin’s [Read/Write].
7. Click on the <User> in the file sharing
and privilege menu.
setup screen
112_ setup screen
To Next Page
Loading...
