Samsung SND-L5083R - To Set Osd; To Set Ir

English _95
● SETUP SCREEN
To Set OSD
1. Select <OSD>.
2. Select each item and set it properly.
• Camera title : It specifies the name
of the camera to be displayed on the
screen.
• Camera title X, Y : It specifies the
position of the camera name on the screen.
• Date & time : Set the time display and date formats on the screen.
• Date & Time X, Y : Specify the position of time display on the screen.
• Weekday overlay : Specify the use of date display date on the screen.
J
`
A position-adjustable item (Camera title, Date & Time) may not be displayed normally if it overlaps
with another fixed OSD item.
To Set IR
1. Select <IR>.
2. Select each item and set it properly.
• Mode : When the IR indicator turns
on in B/W mode, the screen will be protected from saturation on the center area
so that you can identify a short-distant object.
- Off : IR mode will be disabled.
- Auto : Adjust the IR brightness according to the brightness of the object on the
center screen.
M
`
SND-L5013 is not supported.