Table of contents
Approving a connected device from the server 56
Setting the current time 57
Picture
Picture Mode 58
Contrast / Brightness / Sharpness / Color /
Tint (G/R)
59
Color Temperature 59
White Balance 59
2 Point 59
10 Point 59
Gamma 60
Advanced Settings 60
Dynamic Contrast 60
Black Tone 60
Flesh Tone 60
RGB Only Mode 60
Color Space 60
HDMI UHD Color 60
LED Picture Size 61
Resolution 61
Fit to screen 61
LED HDR 61
Inverse Tone Mapping 61
Dynamic Peaking 61
Color Mapping 61
Picture Options 62
Color Tone 62
Digital Clean V 62
HDMI Black Level 62
Film Mode 62
Reset Picture 62
OnScreen Display
Screen Protection 63
Auto Protection Time 63
Message Display 64
Source Info 64
No Signal Message 64
MDC Message 64
D Status Message 64
Language 64
Menu Size 64
Reset OnScreen Display 64
N
Network Status 65
Open Network Settings 65
Server Network Settings 68
Connect to Server 68
MagicInfo Mode 68
Server Access 68
FTP Mode 68
Proxy Server 68
Device Name 68
System
Accessibility 69
Menu Transparency 69
High Contrast 69
Enlarge 69
Start Setup 70
Time 70
Clock Set 70
DST 70
Sleep Timer 70
P On Delay 70
Auto Source Switching 71
Auto Source S 71
Primary Source Recovery 71
Primary Source 71
Secondary Source 71
Power Control 72
Auto P On 72
Max. P Saving 72
S Control 72
3
To Next Page
Loading...
