109
Setting the Blue Screen
If no signal is being received or the signal is very weak, a blue screen automatically replaces
the noisy picture background. If you wish to continue viewing the poor picture, you must set the
“Blue Screen“ mode to “Off“.
1
Press the MENU button. Press the ▲ or ▼ button to select
“Picture”, then press the ENTER button.
2
Press the ▲ or ▼ button to select “Blue Screen”, then
press the ENTER button.
3
Press the ▲ or ▼ button to select “On” or “Off”, then
press the ENTER button.
4
Press the MENU button to exit.
…
More
Blue Screen : Off
Color Weakness : Off
PIP
Picture
TV
Move Enter Return
…
More
Blue Screen : Off
Color Weakness : Off
PIP
Picture
TV
Move Enter Return
➤
➤
Blue Screen is displayed when there is no signal from an external
device in the External Mode, regardless of the Blue Screen Setting.
Mode : Dynamic
√
Size : 16:9
√
Digital NR : On
√
DNIe Demo : Off
√
My Color Control
√
Film Mode : Off
√
†
More
Picture
TV
Move Enter Return
Off
On
Off
On
8_BN68-00835C-00(104~115) 2/5/05 11:30 AM Page 109
To Next Page
Loading...
