How to Reset the TV after the V-Chip Blocks a Channel (“Emergency Escape”)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and the
following message will appear:
1
Enter your PIN number.
To resume normal viewing, tune to a different channel using CH or CH button.
Under certain conditions (depending on the rating of the local TV programs) the V-Chip might lock out
all the channels. In this case, use the V-Chip function for an “emergency escape”:
1
Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2
Press the ▲ or ▼ button to select “V-Chip”, then press the ENTER button.
3
Enter your PIN number, and press the ▲ or ▼ button to temporarily disable the V-Chip Lock.
124
Channel Is Locked by
TV-PG[ S ]
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
Press MENU for main menu.
Channel Is Locked by
TV-PG[ L ]
Use the NUMBER buttons to enter your
pin number to unlock all channels.
Press EXIT to clear PIN.
Press MENU for main menu.
8_BN68-00835C-00(116~133) 2/5/05 11:37 AM Page 124
To Next Page
Loading...
