Chapter 14 - ActiveSync
120
5. Select or deselect the desired applications that you
want to synchronize and click
Next.
6. Click
Finish.
The i700 and the PC should perform the first
ActiveSync. This may take some time, depending
on the amount of information that needs to be
synchronized. When the process is complete,
disconnect the data cable from the i700 and close
ActiveSync.
Performing ActiveSync using IR
If you do not have your data cable and you need to
perform a ActiveSync operation, you can use the IR
port. To use the IR port to perform an ActiveSync:
1. On the PC, launch the ActiveSync application.
2. Click
File and select Connection Settings.
3. Click the check box next to
Allow serial cable or
infrared connection to this COM port
.
4. Click the drop down arrow and select
Infrared Port
(IR)
.
5. Click
OK to close the window.
6. On the i700, tap
Start located in the upper left corner
of the screen.
7. Tap
ActiveSync.
8. Tap
Tools and select Connect via IR.
9. Aim the two devices at each other.
To Next Page
Loading...
