Chapter 16 - Other Applications
138
Infrared Receive
Infrared Receive or IR is used to receive files
between two IR devices. In most cases, you can
also receive files from your PC when it is equipped
with an IR port. The two devices are aimed at each
other approximately four inches apart.
If you have difficulty getting the two devices to
send or receive information, try the following:
• Transfer only one file at a time. No more than 25
contacts should be done at once.
• Make sure that the IR port windows are clear and
free of any dirt or obstacles.
• Adjust the room lighting or move to another
location. Some types of lighting may interfere with
the transmission.
Receiving a File
To receive a file:
1. Prepare a file from another IR device and initiate a
send command.
2. On the i700, tap
Start located in the upper left corner
of the screen.
3. Select
Programs.
4. Tap
Infrared Receive.
5. Aim the two devices at each other and wait for
confirmation that the file has been received.
6. Tap Close.
To Next Page
Loading...
