114 2F. Calendar & Tools
Alarm Clock
Your device comes with a built-in alarm clock that has
multiple alarm capabilities. There is no limit to the
number of alarm events you can create.
1. Press and tap > (Alarm Clock).
2. To activate an alarm, tap the checkmark to the
right of the alarm.
3. To edit an alarm, tap the entry and then tap the
Time field to adjust the alarm time.
䡲 Adjust the hour and minute by tapping either
or .
䡲 Tap the AM or PM button to change the value.
䡲 Tap Set when finished.
4. Tap Ringtone to select an audio ringtone that will
sound with the alarm.
䡲 Tap a ringtone to hear an audio sample.
䡲 Tap OK to accept the ringtone assignment.
5. Tap Vibrate to add a vibration feature to the alarm.
6. Tap the Repeat field to select a repeating status for
the alarm.
䡲 Place a checkmark adjacent to the desired
repetition days
Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday or Sunday and tap OK.
7. Select a unique name for this alarm event by
tapping the
Label field, entering a new label, and
tapping
OK.
8. Tap Done to store the new alarm event.
Note: Upon your first launch of the Alarm Clock application,
three alarm presets are set up by default and ready for
you to customize. These alarms are turned off by
default.
Note: A new alarm can also be created from the Alarm page
by pressing
> Add alarm.
Note: The number of hours and minutes left before the alarm
goes off is briefly displayed onscreen after you set the
new alarm time.
Note: To allow the alarm to sound even while the device is in
silent mode, press and tap
Settings, and then
activate the
Alarm in silent mode field.
SPH-D700.book Page 114 Friday, August 6, 2010 3:57 PM
To Next Page
Loading...
