2I. Camera 135
Camera
䡲 Timer to set a time delay before the camera
remotely takes a picture (self-timer). Once a time
is selected, and you click the shoot button, you
will hear and see a countdown before the image
is taken. Choose from:
Off, 2 sec, 5 sec, or 10 sec.
䡲 Resolution to set the image resolution. Choose
from:
5M (2560x1920), W4M (2560x1536
widescreen
), 3.2M (2048x1536), W2.4M
(2048x1232 widescreen), 2M (1600x1200), W1.5M
(1600x960 widescreen), 0.3M (640x480), or
W0.4M (800x480 widescreen).
䡲 White balance to compensate for color differences
found within different lighting conditions. Choose
from:
Auto (default), Daylight, Cloudy,
Incandescent, or Fluorescent.
䡲 Effects to apply different color effects onto
images. Choose from:
Normal (default), Negative,
Black and White or Sepia.
䡲 ISO to assign a shutter speed. Choose from:
Auto (default), 100, 200, 400, or 800.
䡲 Metering to determine the way in which the
camera determines the exposure. Choose from:
Centre-weighted (default), Spot, or Matrix.
䡲 Anti-Shake to help prevent blurriness due to
normal movements and shaking while taking the
picture.
䡲 Auto contrast to provide clear images even under
backlight conditions where the light can vary the
image.
䡲 Blink detection to warn you of possible subject
blinking before you shoot an image.
䡲 Image quality to set the image quality for your
image. Choose from:
Superfine (default), Fine, or
Normal.
䡲 Adjust to manually adjust image contract, color
saturation levels, and sharpness.
䢇 Settings for additional image settings:
䡲 Guidelines to view image guidelines on your
screen as you take a picture.
䡲 Review to display the recently shot image for
review. Choose from:
Off, 2 sec, or On.
䡲 GPS to record GPS information into the image file.
䡲 Shutter sound to assign a sound when the image
is taken. Choose from:
Sound 1 (default), Sound 2,
Sound 3, or Off.
SPH-D700.book Page 135 Friday, August 6, 2010 3:57 PM
To Next Page
Loading...
