140 2I. Camera
䡲 Recording mode to set the image quality for your
image. Choose from:
Normal (for SDHC card
storage) or
Limit for MMS (sending the video in an
MMS/video message).
䡲 Flash set the flash on or off.
䡲 Exposure value to adjust the overall image
brightness. Use the onscreen slider to adjust the
value.
䡲 Settings to access the camera options and
settings:
● Camcorder: to configure the camera hardware
parameters (page 140).
● Settings: provides additional image shooting
options.
䡲 Mode to toggle between the camcorder and
camera modes.
䡲 Shoot touch to begin shooting the video.
䡲 Video Viewer to review the saved videos. Tap the
onscreen arrows to view additional videos.
● Additional features in the viewer include
Share, Play, or Delete.
Camcorder Options and Settings
Tap the settings icon to access the options and
settings screens where there are two available tabs.
䊳 Tap OK to exit from a menu and return to the
Settings tab.
– or –
Tap a setting option to reveal an onscreen
description.
䢇 Camcorder for general camera settings:
䡲 Outdoor visibility to adjust the display screen for
better viewing outdoors.
䡲 Timer to set a time delay before the camcorder
remotely shoots a video (self-timer). Once a time
is selected, and you click the shoot button, you
will hear and see a countdown before the video is
shot. Choose from:
Off, 2 sec, 5 sec, or 10 sec.
䡲 Resolution to set the video resolution. Choose
from:
1280x720, 720x480, 640x480, 320x240, or
176x144.
SPH-D700.book Page 140 Friday, August 6, 2010 3:57 PM
To Next Page
Loading...
