Samsung SR8730 - Robot Cleaning and Maintenance; Sensor and Camera Cleaning

30_ maintain tools and fi lters
CLEANING THE VACUUM CLEANING ROBOT
Please keep the cleaning and maintenance methods in mind
When the Power Switch is damaged, please contact the service
■
agent so that it does not cause any accidents.
Do not use any means or mechanical devices not installed by the
■
manufacturer that could accelerate the deformation of the Vacuum
cleaning Robot.
Always turn off the power switch at the
■
bottom of the main unit before cleaning
the robotic vacuum. The Vacuum cleaning
Robot could operate suddenly and cause
an injury.
Cleaning the Sensor Window and the Camera
You must turn off the Power Switch at the bottom of the main
unit before cleaning the robotic vacuum.
Never spray water, thinner, benzene etc. directly onto the main unit
■
of Vacuum cleaning Robot.
Lightly wipe the sensor window or camera
■
using a soft cloth.
Front Sensor window
Front Sensor window
Camera
Camera
Front Sensor Window and
Camera
Cliff Sensor Window Rear Sensor Window
maintain tools and fi lters
DJ68-00682F(0.0).indd 30DJ68-00682F(0.0).indd 30 2012.9.7 9:17:20 AM2012.9.7 9:17:20 AM