What to do if a foreign substance is caught on the edge-cleaning side rotating brush of Samsung Vacuum Cleaner?
If a foreign substance is caught on the edge-cleaning side rotating brush of your Samsung Vacuum Cleaner, turn off the Power Switch at the bottom and wipe the foreign substance from the edge-cleaning side rotating brush.
What to do if Samsung Vacuum Cleaning Robot stopped operating while cleaning?
If the Vacuum cleaning Robot stops operating while cleaning, try the following: Lift up the Vacuum cleaning Robot and manually dock it onto the charger to charge it. You can also turn off the Power Switch and remove any wires, thin towels, or other obstructions. Moving the Vacuum cleaning Robot to another place to clean may also help.
What to do if Samsung Vacuum Cleaning Robot does not operate at all before cleaning?
If your Samsung Vacuum Cleaning Robot doesn't operate before cleaning, make sure that the dust bin is installed and the Power Switch is turned on. Press the power button. If these steps don't help, lift the robot and manually dock it onto the charger. Also, consider replacing the batteries in the remote control if they are depleted.
How to fix Samsung SR8730 bumper sensor?
To fix the bumper sensor on your Samsung Vacuum Cleaner, slightly pull the stuck bumper outward.
Why is the suction power weak on my Samsung Vacuum Cleaner?
If the suction power of your Samsung Vacuum Cleaner is weak, try these steps: First, stop the vacuum and empty the dust bin. Second, turn off the power switch and remove any foreign substances from the suction inlet. Finally, ensure you clean the filter thoroughly.
What to do if Samsung SR8730 dust bin not inserted?
If the dust bin of your Samsung Vacuum Cleaner is not inserted, insert it until you hear a 'Click' sound.
What to do if there is substance on the obstacle sensor window of my Samsung SR8730 Vacuum Cleaner?
If there is a foreign substance (dust, stain, etc.) on the obstacle sensor window of your Samsung Vacuum Cleaner, turn off the power switch at the bottom and wipe the front and rear sensor windows with a soft cloth.
What to do if there is substance on the edge-cleaning side rotating brush of my Samsung SR8730 Vacuum Cleaner?
If a foreign substance (string, cloth, etc.) is caught on the edge-cleaning side rotating brush of your Samsung Vacuum Cleaner, turn off the power switch at the bottom and wipe the foreign substance from the brush.
What to do if there is a foreign substance on the Obstacle sensor window of my Samsung SR8730?
If a foreign substance (dust, stain, etc.) is on the Obstacle sensor window, turn off the Power Switch at the bottom and wipe the foreign substance from the front and rear sensor windows using a soft cloth.
What to do if there is a foreign substance caught in the right driving wheel of my Samsung Vacuum Cleaner?
If a foreign substance (string, paper, toy, etc.) is caught in the right driving wheel, turn off the Power Switch at the bottom and remove the foreign substance from the right driving wheel.
Explains the meaning of WARNING and CAUTION symbols used for safety.
Explains the meaning of the NOTE symbol for safety.
General safety precautions for operating the vacuum cleaner.
Safety instructions specific to the battery charger.
Lists locations to avoid due to combustible materials or unsuitable conditions.
Advice for handling carpets with tassels and warnings about black floors.
Steps to clear the floor of small objects and debris before cleaning.
Informing family and ensuring child/pet safety during operation.
Safety measures regarding the charger's power cord placement.
Guidelines for accessible and obstacle-free charger placement.
Precautions regarding charger pins, liquids, and unintended use.
Warnings about thick carpets, high locations, and furniture interaction.
Procedure for dealing with unusual sounds, smells, or smoke.
Safe methods for cleaning the robot's exterior and bumper.
Instructions for cleaning sensors and warning against disassembly.
Guidance on power cord damage and battery replacement.
Explains the Visionary Mapping Plus™ feature for navigation.
Describes the robot's ability to clean corners sequentially.
Details the available cleaning modes: Auto, Spot, Max, Manual.
Process of the robot automatically returning to charge.
Function of edge brushes, doorsill crossing, and anti-crash systems.
Automatic stopping mechanism when the robot is lifted.
Identifies the main body and charging station.
Lists additional items like User Manual, Cleaning Brush, Remote Control.
Labels parts of the main vacuum cleaner unit.
Labels parts of the charging station.
Overview of the remote control buttons and functions.
Step-by-step guide for installing batteries in the remote.
Explanation of the main unit's display panel indicators.
Explanation of the main unit's physical buttons.
Lists the steps for setting up the robot.
How to turn the robot's power on and off.
Instructions on how to start and stop cleaning operations.
Details on powering the robot on and off.
How to use the Recharging button and test auto-charge.
Solutions for issues with the robot not returning to the charger.
Instructions for cleaning sensors and camera.
General| Charging time | 2 h |
|---|---|
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Noise level | 70 dB |
| Cleaning speed | 300 mm/sec |
| HEPA filtration system | - |
| Vacuum cleaner programs | Auto, Spot |
| Shape | Round |
| Product color | Blue |
| Dust container type | Bagless |
| Package depth | 152 mm |
| Package width | 436 mm |
| Package height | 499 mm |
| Package weight | 6100 g |
Weight and Dimensions| Width | - mm |
|---|---|
| Height | 90 mm |
| Weight | 3600 g |
| Diameter | 355 mm |
To Next Page
