What to do if there is substance on the obstacle sensor window of my Samsung SR8730 Vacuum Cleaner?
If there is a foreign substance (dust, stain, etc.) on the obstacle sensor window of your Samsung Vacuum Cleaner, turn off the power switch at the bottom and wipe the front and rear sensor windows with a soft cloth.
What to do if my Samsung Vacuum Cleaning Robot is caught or stuck?
If your Samsung Vacuum Cleaning Robot gets caught, stuck, or trapped, the cause may be a foreign substance caught in the power brush or driving wheels. Turn off the power switch at the bottom of the robot and remove any foreign substances (like string, paper, or toys) from the power brush, left driving wheel, or right driving wheel.
What to do if my Samsung Vacuum Cleaning Robot stops operating while cleaning?
If your Samsung Vacuum Cleaning Robot stops operating during cleaning, try the following: Lift the robot and manually dock it onto the charger to charge it. Alternatively, turn off the power switch and remove any wires, thin towels, or move the robot to another location to continue cleaning.
What to do if Samsung Vacuum Cleaning Robot is caught, stuck or trapped while navigating?
If your Samsung Vacuum Cleaning Robot is caught, stuck, or trapped, turn off the Power Switch at the bottom and move it to a different location.
What to do if my Samsung Vacuum Cleaning Robot does not operate at all?
If the Vacuum cleaning Robot does not operate, make sure you have installed the dust bin and turned on the Power Switch. Press the power button. If that doesn't work, lift up the Vacuum cleaning Robot, and manually dock it onto the charger to charge it. Also, the Vacuum cleaning Robot will not operate when the battery in the remote control is depleted, so replace the batteries in the remote control (AAA type).
What to do if there is a foreign substance on the Cliff sensor window of my Samsung SR8730 Vacuum Cleaner?
If a foreign substance (Dust, stain, etc.) is on the Cliff sensor window, turn off the Power Switch at the bottom and wipe the foreign substance on the cliff sensor window with a soft cloth.
What to do if there is a foreign substance on the Obstacle sensor window of my Samsung SR8730?
If a foreign substance (dust, stain, etc.) is on the Obstacle sensor window, turn off the Power Switch at the bottom and wipe the foreign substance from the front and rear sensor windows using a soft cloth.
What to do if the dust bin is not inserted in my Samsung SR8730 Vacuum Cleaner?
If the dust bin is not inserted, insert it until you hear a “Click” sound.
What to do if there is a foreign substance caught in the right driving wheel of my Samsung Vacuum Cleaner?
If a foreign substance (string, paper, toy, etc.) is caught in the right driving wheel, turn off the Power Switch at the bottom and remove the foreign substance from the right driving wheel.
What to do if there is a foreign substance caught in the left driving wheel of my Samsung SR8730?
If a foreign substance (string, paper, toy, etc.) is caught in the left driving wheel, turn off the Power Switch at the bottom and remove the foreign substance from the left driving wheel.
Explains the meaning of WARNING and CAUTION symbols used for safety.
Explains the meaning of the NOTE symbol for safety.
General safety precautions for operating the vacuum cleaner.
Safety instructions specific to the battery charger.
Lists locations to avoid due to combustible materials or unsuitable conditions.
Advice for handling carpets with tassels and warnings about black floors.
Steps to clear the floor of small objects and debris before cleaning.
Informing family and ensuring child/pet safety during operation.
Safety measures regarding the charger's power cord placement.
Guidelines for accessible and obstacle-free charger placement.
Precautions regarding charger pins, liquids, and unintended use.
Warnings about thick carpets, high locations, and furniture interaction.
Procedure for dealing with unusual sounds, smells, or smoke.
Safe methods for cleaning the robot's exterior and bumper.
Instructions for cleaning sensors and warning against disassembly.
Guidance on power cord damage and battery replacement.
Explains the Visionary Mapping Plus™ feature for navigation.
Describes the robot's ability to clean corners sequentially.
Details the available cleaning modes: Auto, Spot, Max, Manual.
Process of the robot automatically returning to charge.
Function of edge brushes, doorsill crossing, and anti-crash systems.
Automatic stopping mechanism when the robot is lifted.
Identifies the main body and charging station.
Lists additional items like User Manual, Cleaning Brush, Remote Control.
Labels parts of the main vacuum cleaner unit.
Labels parts of the charging station.
Overview of the remote control buttons and functions.
Step-by-step guide for installing batteries in the remote.
Explanation of the main unit's display panel indicators.
Explanation of the main unit's physical buttons.
Lists the steps for setting up the robot.
How to turn the robot's power on and off.
Instructions on how to start and stop cleaning operations.
Details on powering the robot on and off.
How to use the Recharging button and test auto-charge.
Solutions for issues with the robot not returning to the charger.
Instructions for cleaning sensors and camera.
General| Charging time | 2 h |
|---|---|
| Battery technology | Nickel-Metal Hydride (NiMH) |
| Noise level | 70 dB |
| Cleaning speed | 300 mm/sec |
| HEPA filtration system | - |
| Vacuum cleaner programs | Auto, Spot |
| Shape | Round |
| Product color | Blue |
| Dust container type | Bagless |
| Package depth | 152 mm |
| Package width | 436 mm |
| Package height | 499 mm |
| Package weight | 6100 g |
Weight and Dimensions| Width | - mm |
|---|---|
| Height | 90 mm |
| Weight | 3600 g |
| Diameter | 355 mm |
To Next Page
