To Next PageTo Next PageHow to fix Samsung SR8980 User Manual (Windows 7) Vacuum Cleaner when it cannot find the charger?
If your Samsung Vacuum Cleaner cannot find the charger, try moving the VIRTUAL GUARD to another location to allow the robot to charge automatically. Also, ensure that the power switch on the left side of the autoemptier is turned on.
How to clean Obstacle sensor window on Samsung SR8980 User Manual (Windows 7)?
If there is a foreign substance (dust, stain etc.) on the Obstacle sensor window of your Samsung Vacuum Cleaner, turn off the Power Switch at the bottom and wipe the foreign substance from the front and rear sensor windows using a soft cloth.
How to clean Cliff sensor window on Samsung Vacuum Cleaner?
If there is a foreign substance (Dust, stain etc.) is on the Cliff sensor window of your Samsung Vacuum Cleaner, turn off the Power Switch at the bottom and wipe the foreign substance on the cliff sensor window with a soft cloth.
What to do if Samsung SR8980 User Manual (Windows 7) stopped operating while cleaning?
If your Samsung Vacuum Cleaner robot stops operating while cleaning, there could be several reasons. It might need charging; lift it and manually dock it onto the charger. It could also be caught on wires; turn off the power and remove any wires. The robot may be stuck due to a height difference or on a doorsill; in these cases, turn off the power and move it to another location. Also, check for thin towels wrapped around the driving wheel, and remove them after turning off the power.
Why Samsung auto-emptier does not empty the dustbin automatically?
If your Samsung auto-emptier does not empty the dustbin automatically, several factors could be at play. Check and clean the filter for any foreign substances. Remove any foreign substances from inside the dustbin. If the bottom of the auto-emptier is clogged, open it with a coin and remove the dust. Ensure the dustbin cyclone cap is closed. Verify the Auto Empty lamp is on by pressing the Auto Empty On/Off Select button. Make sure the dustbin and filter are correctly mounted and that the power brush is free of obstructions like hair or strings.
How to troubleshoot Samsung Vacuum Cleaner that does not turn on?
If your Samsung Vacuum Cleaner robot does not operate at all before cleaning, make sure you install the dust bin, turn on the power switch, and press the button to start it. To turn it off, press and hold the button for 3 seconds or longer. If it still doesn't work, lift the robot and manually dock it onto the charger. Also, check and replace the batteries in the remote control if they are depleted.
What to do if Samsung Vacuum Cleaning robot is not charging?
If your Samsung Vacuum Cleaning robot is not charging, check the charging terminals for any foreign substances and remove them. Also, ensure that the power switch of the auto-emptier is turned on.
How to insert dust bin in Samsung Vacuum Cleaner?
Ensure that you insert the dust bin into your Samsung Vacuum Cleaner until you hear a 'Click' sound.
Why is the suction power weak on my Samsung SR8980 User Manual (Windows 7) Vacuum Cleaner?
If the suction power of your Samsung Vacuum Cleaner is weak while cleaning, it might be due to a full dust bin. Stop the robot and empty the dust bin. Alternatively, the suction inlet could be clogged; in that case, turn off the power and remove any foreign substances. Lastly, a clogged filter can also cause weak suction, so ensure you clean the filter thoroughly.
Why is the suction power of my Samsung auto-emptier weak?
If the suction power of your Samsung auto-emptier is weak, it could be due to several reasons. If the Full lamp is on, empty the dustbin and clean the air inlet at the bottom. If the air inlet is clogged by a foreign substance, remove it. Also, clean the filter if it's covered in dust. Finally, check the cyclone for dust or hair accumulation, and remove any debris after opening the cyclone cap.
General| Brand | Samsung |
|---|---|
| Model | SR8980 User Manual (Windows 7) |
| Category | Vacuum Cleaner |
| Language | English |
Explains the meaning of caution and warning symbols used in the manual.
Provides crucial safety instructions for using the vacuum cleaning robot and its charger.
Details safety precautions related to the power cord and electrical connections.
Outlines essential checks and precautions before operating the vacuum cleaning robot.
Describes how to confine the robot to a section using the virtual wall mode.
Lists and explains the different cleaning modes available for the robot.
Details how the robot automatically returns to the charger when the battery is low.
Explains the automatic dust emptying process from the robot to the auto-emptier.
Explains doorsill crossing, obstacle avoidance, and anti-falling mechanisms.
Lists and illustrates the main and other components of the vacuum cleaning robot.
Provides detailed labels and diagrams for the main unit parts.
Details the components and functions of the charging station.
Instructions for setting up the Virtual Guard for zone confinement.
Overview of remote control buttons and their functions.
Explains the different indicators and displays on the robot's control panel.
Steps for installing the robot and turning its power on/off.
Step-by-step guide on how to properly install the charging station.
Explains the operation of the automatic dust emptying feature.
Details the process of charging the vacuum cleaning robot's battery.
Information regarding the Li-ion battery, its warranty, and care.
Guide on how to set the current time using the remote control.
Instructions on setting up the Virtual Guard for zone confinement.
How to start, stop, and cancel all cleaning functions of the robot.
How to manually return the robot to the charger for recharging.
Details how the robot automatically cleans the house until completion.
How to clean specific areas with concentrated cleaning.
Explains the cleaning mode that runs until the battery is nearly depleted.
How to control the robot's movement directly using the remote.
How to schedule a one-off cleaning run at a specific time.
How to schedule cleaning runs for specific days and times throughout the week.
How to configure additional functions like Turbo Mode and Sound Effects.
General advice on keeping the robot clean and well-maintained.
Instructions for cleaning the robot's sensors and camera for optimal performance.
Step-by-step guide to emptying and cleaning the dust bin and filters.
Instructions for emptying the auto-emptier dustbin and cleaning its cyclone.
Detailed steps for cleaning the filter within the auto-emptier dustbin.
Instructions for removing and cleaning the main power brush.
Guide on how to clean the side rotating brush for effective edge cleaning.
Steps to clean the driving wheels to prevent performance issues.
A checklist to help diagnose common issues before contacting customer service.
Solutions for robot not operating, not finding charger, or moving diagonally.
Troubleshooting for auto-emptier collisions, dust emptying, and charging failures.
Explains common error codes displayed by the robot and their solutions.
Details physical dimensions, weight, power, and battery specifications.
Information on cleaning modes, charging time, and cleaning time.
