operating _37
03 OPERATING
ADDITIONAL FUNCTIONS
Using additional functions
You can use the cleaning robot more easily and conveniently using various additional
functions.
You can only confi gure the additional functions with the remote control.
■
Turbo Mode
Each time you press the Turbo button, the Turbo icon on the
display panel is turned on or off sequentially.
On turbo (Turbo Mode) : The power brush rotates at
maximum speed.
Off turbo (Normal Mode) : The power brush rotates at normal
speed.
Dust Sensor Mode
Each time you press the Dust Sensor button, the Dust Sensor
icon on the display panel is turned off or on sequentially.
Dust Sensor Mode On : In Auto cleaning mode, when the
vacuum cleaner senses that dust has entered a specifi c area,
the cleaner rotates and changes direction to clean that area,
and then after cleaning that area, resumes its previous course.
In Spot, Max, Manual mode, when the vacuum cleaner senses
that dust has entered a specifi c area, the boost continues to
operate for several seconds.
Dust Sensor Mode Off : The cleaner does not sense the dust
entering and continues to drive as set in the selected cleaning
mode.
Selecting a Sound Effect
Press the Sound select button to select a sound effect.
Each time you press this button, Sound Effects
■→
Mute is
selected in this sequence.
Sound Effects : - Plays sound effects.
Mute : - Plays no sound or announcements.
DJ68-00632D(0.0).indd 37DJ68-00632D(0.0).indd 37 2012.1.19 9:50:42 AM2012.1.19 9:50:42 AM
To Next Page
Loading...
Need help?
General
