42_ maintain
CLEANING THE BOTTOM OF THE AUTO-EMPTIER
Turn the auto-emptier over so that its bottom is facing 1.
upward. Then open the 6 fi xing screws using a coin as
shown in the fi gure.
Remove the bottom cover from the 2.
auto-emptier using a coin, and then
clean the bottom cover.
Clean the bottom cover with water.3.
Dry the bottom cover in the shade.4.
After a cleaning run, close the bottom cover in the direction 5.
of the arrow.
Fasten the 6 fi xing screws as shown in the fi gure above in 6.
the direction of the arrow.
DJ68-00632D(0.0).indd 42DJ68-00632D(0.0).indd 42 2012.1.19 9:50:50 AM2012.1.19 9:50:50 AM
To Next Page
Loading...
Need help?
General
