What to do if ESC key doesn't exit full screen on Samsung DVR WebViewer?
If pressing the ESC key in full screen mode of the WebViewer on your Samsung DVR doesn't switch the system to a normal split mode, press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and then press the ESC key again.
What to do if my Samsung DVR displays 'NO HDD' icon?
If your Samsung DVR displays the “NO HDD” icon and an error message, check the HDD for connection. If the problem persists in a normal condition, contact the nearest service center to have the HDD checked by the service personnel.
What to do if my Samsung SRD-1650D DVR does not recognize all installed disks?
If your Samsung DVR does not recognize all the installed disks, it may simply need more time to recognize multiple external HDDs, so try again in a moment. If the problem persists, it may occur due to a mechanical error of the HDD installed, so try again with a different HDD.
Why does my Samsung DVR display a black screen on some channels?
If some channels on your Samsung DVR display a black screen even if they receive video sources, first check if the camera connected to the system properly displays the image and if the camera is properly supplied with power. Sometimes, this problem may occur on a channel with weak video signal from a video distributor that is connected to multiple systems. In this case, input the video source of the camera directly into the DVR.
Why is the time bar not showing in search mode on my Samsung SRD-1650D?
The timeline on your Samsung DVR can switch between normal and extension mode. If the time bar is not displayed in Search mode, switch to normal mode or use the left or right button to navigate through the time bar.
How to exit full screen mode on Samsung SRD-1650D DVR WebViewer?
Press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and press the ESC key again.
How to improve the recording quality on my Samsung SRD-1650D DVR?
If the image quality of the recording data on your Samsung DVR isn't satisfactory, try increasing the resolution and quality level in Menu – Record – Quality / Resolution. Select a bigger size when specifying the recording size (4CIF>2CIF>CIF). Specify a bigger level for the recording quality. Keep in mind that increasing resolution and recording quality will increase the data size, filling the HDD faster and overwriting existing data sooner.
What to do if the REC button doesn't work on my Samsung SRD-1650D?
If you press the [REC] button on the front panel of your Samsung DVR and the REC indicator doesn't flash, and the player doesn't start recording, check if there is free space on the HDD. Also, verify that the record mode is set to ON in the record mode setting.
How to fix a Samsung SRD-1650D that does not turn on?
If your Samsung DVR does not turn on and the indicator on the front panel remains off, check whether the power supply system is properly connected. Also, verify the system's input voltage from the power source. If the problem continues, it might be necessary to inspect the power supplier and replace it if needed.
Why does my Samsung DVR say 'Need to reset date/time'?
If your Samsung DVR displays a message saying “Need to reset date/time,” it means there's an issue with the internal clock's time setting or the clock itself. In this case, it is recommended to contact the retailer or a service center for further assistance.
Essential safety precautions for operating the unit, to be read before use.
Important notices and preparation steps before using the DVR.
Highlights the key features and capabilities of the DVR system.
Identifies and explains the front panel components of the DVR.
Identifies and explains the rear panel components and connections.
Details the functions and usage of the remote control.
Recommendations for ensuring a suitable environment for DVR installation.
Steps for installing the DVR unit in a rack mount.
Instructions and precautions for adding or replacing HDDs.
Instructions for connecting video, audio, and monitor outputs.
How to connect and use USB devices with the DVR.
Guide for connecting external SATA HDDs for storage.
How to connect and control PTZ cameras via RS-485.
Steps for establishing and configuring network connections.
Initial steps for starting and setting up the DVR system.
Process for logging into the DVR to access features and menus.
Explains icons and status indicators on the DVR's live screen.
Describes how to switch between different live screen display modes.
Information about the Spot Out feature for secondary video output.
Overview of system configuration options.
How to manage user permissions and access levels.
How to check system information and manage software updates.
How to check and manage storage devices like HDDs and USB drives.
Overview of recording configuration options.
Overview of event recording settings like sensor and motion detection.
Overview of network configuration settings.
Initial steps for activating and using PTZ camera controls.
Detailed guide on using PTZ camera functions like Pan, Tilt, and Zoom.
How to access and use the search menu for recorded data.
Searching recorded video by specific date and time.
Searching recorded data based on events like motion or alarms.
How to play back recorded video data.
Introduction to the Web Viewer software and its capabilities.
Minimum hardware and software requirements for running Web Viewer.
Steps to connect to the DVR using the Web Viewer.
How to use the Live Viewer interface to monitor cameras.
Configuring DVR settings remotely via the network.
How to play back data backed up in SEC format.
System requirements for PCs to run the backup viewer.
Detailed technical specifications for specific DVR models.
Visual overview and dimensions of the DVR unit.
Lists the factory default settings for various DVR configurations.
Common issues and their corresponding solutions for the DVR.
Troubleshooting table listing symptoms and recommended countermeasures.
Troubleshooting table listing symptoms and recommended countermeasures.
General| Display frame rate | 480 fps |
|---|---|
| Display resolution | 704 x 576 pixels |
| Product color | Black |
| Supported protocols | TCP/IP, DHCP, PPPoE, SMTP, NTP, HTTP, DDNS, RTP, RTSP, Samsung-T/E, Pelco-D/P, AD, VCL TP, Vicon PTZ, CCVC, Pelco-C |
| Maximum recording time | 6 h |
| Analog signal format system | NTSC, PAL |
| Compatible operating systems | Linux |
| Audio input | 16 |
| eSATA ports quantity | 2 |
| USB 2.0 ports quantity | 3 |
| Ethernet interface type | Fast Ethernet |
| Supported network protocols | RTSP/RTP (UDP), CGI, HTTP |
| HDD interface | Serial ATA |
| Number of HDDs supported | 5 |
| Optical drive type | DVD-RW |
| Optical drive included | Yes |
| Storage temperature (T-T) | 20 - 85 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Power consumption (max) | 60 W |
Weight and Dimensions| Weight | 7500 g |
|---|---|
| Dimensions (WxDxH) | 440 x 426.8 x 88 mm |
To Next Page
