To Next Page
H
Hayley WarnerAug 20, 2025
What to do if I forgot my Samsung DVR password?
- CCharles HollandAug 20, 2025
If you forgot your password for the Samsung DVR, you should contact the DVR administrator for assistance.
What to do if I forgot my Samsung DVR password?
If you forgot your password for the Samsung DVR, you should contact the DVR administrator for assistance.
How to fix a Samsung SRD-1656D that does not turn on?
First, verify that the power supply system is correctly connected to your Samsung DVR. Next, check the system for the correct input voltage from the power source. If the problem continues, the power supplier may be defective and need replacement.
What to do if 'NO HDD' icon appears on my Samsung SRD-1656D?
First, ensure the HDD is properly connected to your Samsung DVR. If the error persists under normal conditions, it is recommended to have the HDD checked by service personnel at the nearest service center.
Why is my Samsung SRD-1656D DVR not recognizing the additional HDD I installed?
The additional HDD may not be supported by the Samsung DVR. Check the compatibility list to confirm if the HDD is supported.
What to do if the REC button doesn't work on my Samsung DVR?
First, check if there is sufficient free space on the HDD for recording on your Samsung DVR. Also, verify that the record mode is set to ON in the record mode settings.
Why doesn't my Samsung DVR recognize the external SATA HDD I connected?
Refer to the compatibility list of external storage devices to verify if the connected device is supported by your Samsung DVR.
Why does the PTZ button not work on my Samsung SRD-1656D?
Go to Menu ¨ Camera on your Samsung DVR and check if the current protocols and other settings in the PTZ device are properly configured according to the PTZ camera.
Why doesn't the Channel button work on the Live screen of my Samsung DVR?
The Channel button on your Samsung DVR will not function if the current screen is in event monitoring mode. To exit this mode, press the [ALARM] button, then select a channel.
How to switch to Live playback mode on my Samsung DVR?
To switch to Live mode on your Samsung DVR, press the Stop [@] button on the DVR or the remote control, or click the [ ] icon on the launcher.
Why can't I play backup data from my Samsung SRD-1656D DVR on my PC?
When backing up data, remember that you have the option to choose the player: PC or DVR. If using a PC, ensure the backup file format is SEC. If using the DVR, formatting backup files should be done by the DVR itself.
General| Video Input Channels | 16 |
|---|---|
| Video Output Channels | 1 |
| Compression Format | H.264 |
| Audio Outputs | 1 |
| USB Ports | 2 |
| Power Supply | 12V DC |
| Recording Frame Rate | 30 fps |
| Network Interface | Ethernet (RJ-45) |
| Operating Temperature | 0°C to 40°C |
Read and follow all safety instructions carefully before using the unit.
Information regarding battery safety and system shutdown procedures.
Guidelines for setting passwords and protecting personal information.
Procedure and precautions for installing or replacing the Hard Disk Drive.
How to access the DVR and restricted menus by logging in.
Configure system properties, devices, and options for recording, event, backup, network.
Set user permissions for DVR functions and settings.
Set and change the Administrator's ID and password.
Check system version, update software, and manage data backup/initialization.
Procedure for updating the DVR's software.
Configure camera, storage, remote, POS, and monitor settings.
Configure video, audio, channel name, and dwell time for cameras.
Configure PTZ camera ID and protocols for communication.
Check and manage storage devices like HDDs and USB drives.
Configure scheduled recording, event recording, and related settings.
Schedule recordings for specific dates and times.
Set recording options for sensor, motion, video loss, or tampering events.
Set motion detection mode, sensitivity, and alarm.
Check backup device and set backup schedule by channel or time.
Backup desired data to a connected device.
Configure network environment for remote monitoring and mail forwarding.
Set the network connection route and protocol.
Adjust settings and control PTZ cameras.
Search for recorded data by specific date and time.
Play data stored in HDD or backup, and desired portions of data.
Steps to connect to the DVR using a web browser on Windows.
Interface overview and functions of the Live Viewer screen.
Adjust settings and control PTZ cameras.
Interface overview and functions of the Search Viewer screen.
Configure DVR settings remotely over the network.
Manage user accounts, groups, and permissions.
Check system information and manage software updates.
Configure camera settings.
Detailed technical specifications for SRD-876D, SRD-1656D, and SRD-1676D models.
Provides solutions for common symptoms and problems encountered with the DVR.
