To Next Page
J
jerry17Aug 20, 2025
What to do if I forgot my password for Samsung SRD-1673D DVR?
- BbrianhernandezAug 20, 2025
If you've forgotten your password for the Samsung DVR, you should contact the DVR administrator for assistance.
What to do if I forgot my password for Samsung SRD-1673D DVR?
If you've forgotten your password for the Samsung DVR, you should contact the DVR administrator for assistance.
Why does my Samsung SRD-1673D DVR say 'Need to reset date/time'?
If the Samsung DVR displays a 'Need to reset date/time' message, this indicates a problem with the internal clock's time setting or an error in the clock itself. In this case, it is recommended to contact the retailer or service center for further assistance.
How to fix a Samsung SRD-1673D DVR that won't turn on?
If your Samsung DVR does not turn on and the front panel indicator is not working, check the following: * Ensure the power supply is properly connected. * Verify the system is receiving the correct input voltage from the power source. If the issue persists, the power supplier may be faulty and require replacement.
What to do if my Samsung DVR shows a 'NO HDD' error?
If the Samsung DVR displays the “NO HDD” icon and an error message, check the HDD connection. If the problem persists under normal conditions, contact the nearest service center to have the HDD inspected by qualified personnel.
How to improve recording quality on Samsung DVR?
If the image quality of the recording data on your Samsung DVR is not good, try the following: * Increase the resolution and quality level in Menu – Record – Quality / Resolution. * Select a bigger recording size. (WD1>4CIF>2CIF>CIF). Note that the recording image in the CIF format shows a deteriorated quality as it is enlarged from a small-sized image. * Specify a bigger level for the recording quality. Keep in mind that increasing resolution and recording quality will increase the data size, filling the HDD faster and potentially leading to more frequent overwriting of existing data.
Why does my Samsung DVR keep showing the logo screen?
If the Samsung DVR displays the logo image repeatedly, it may indicate a problem with the main board or corrupted software. Contact the nearest service center for assistance.
Why are some channels black on my Samsung SRD-1673D?
If some channels on your Samsung DVR only display a black screen despite receiving video sources, try these steps: * Check if the camera connected to the system properly displays the image. * Verify that the camera is properly supplied with power. * If a video distributor connected to multiple systems is in use, the channel might have a weak video signal. Input the camera's video source directly into the DVR to troubleshoot.
Why doesn't my Samsung SRD-1673D recognize the new HDD I installed?
If your Samsung DVR does not recognize an additional HDD, consult the compatibility list to ensure the HDD is supported by the DVR. Contact the retailer where you purchased the DVR for the compatibility list.
Why is my external HDD not recognized by the Samsung SRD-1673D?
If you've connected an external storage device (external SATA HDD) to your Samsung DVR and it's not being recognized, check the compatibility list of external storage devices to ensure the connected device is supported by the DVR. Contact the retailer where you purchased the DVR for the compatibility list.
What to do if the REC button doesn't work on my Samsung SRD-1673D DVR?
If you press the [REC] button on the front panel of your Samsung DVR and the REC indicator doesn't flash, nor does the player start recording, check if there is free space on the HDD and verify that the record mode is set to ON in the record mode setting.
General| Model | SRD-1673D |
|---|---|
| Video Input | 16 Channels |
| Audio Inputs | 16 Channels |
| Audio Outputs | 1 Channel |
| Compression | H.264 |
| Operating System | Embedded Linux |
| Recording Resolution | 704x480 |
| Recording Frame Rate | 120 fps |
| Network Interface | Ethernet (RJ-45) |
| USB Ports | 2 USB Ports |
| Remote Viewing | Yes (via network) |
| Power Supply | 12V DC |
