30_ live
live
Manual Switching
Press the left/right button on the front panel or the remote control, or click the arrow <
◄
/
►
> key to move to
the next split mode.
If pressing the right [
►
] button in 9-split mode :
9-split (CH 1~9) mode p 9-split (CH 10~16) mode p Auto Sequence
If pressing the right [
►
] button in 4-split mode :
Channel (CH 1~4) p Channel (CH 5~8) p Channel (CH 9~12) p Channel (CH 13~16) p Auto Sequence
Channel Setting
You can display the channel in a desired area of a split screen.
Place the cursor over the camera name of each channel to display the <
▼
> key to the right on the screen.
Click a camera name to display a channel list where you can select a different channel.
Select a desired channel and click it.
The current channel will be switched to the selected one.
Use the cursor to select a channel to move, and drag and drop it to a desired channel; this can also
change the channel position.
Ex : if switching CH 1 to CH 7
•
•
1.
2.
3.
CH1 CH2
CH3 CH4
To Next Page
Loading...
