Samsung SRF653CDLS - Completing the Setup

English - 23
SETTING UP
COMPLETING THE SET UP
Nowthatyouhaveyournewrefrigeratorinstalled
inplace,youarereadytosetupandenjoythe
featuresandfunctionsoftheappliance.
Bycompletingthefollowingsteps,yourrefrigerator
shouldbefullyoperational.
1. Makesureyourrefrigeratorisinanappropriate
locationwithreasonableclearancebetweenit
andthewall.Refertoinstallationinstructionsin
thismanual.
2. Oncetherefrigeratorispluggedin,makesure
theinteriorlightcomesonwhenyouopenthe
doors.
3. SettheTemperaturecontroltothecoldest
temperatureandwaitforanhour.
Thefreezerwillgetslightlychilledandthemotor
willrunsmoothly.
Resettherefrigeratorandfreezertothe
temperaturesyouwant.
4. Afteryouplugtherefrigeratorin,itwill
takeafewhourstoreachtheappropriate
temperature.
Youcanstorefoodanddrinksintherefrigerator
afterthetemperatureissufcientlycool.
Ifcondensationorwaterdropsappear
onbothsidesofthefridgedoor’scentral
part,turntheEnergySavermodeoffafter
removingthecondensation.
(SeetheexplanationoftheEnergySaver
buttonin“Usingthecontrolpanel”on
page25.)
DA68-02954H (EN)-00-���.indd 23 2016. 3. 14. �� 10:44