Samsung ST80 - OB Setting; Back Lash ADJ

SAMSUNG This Document can not be used without Samsung’s authorization 5-3
Adjustment
5-2 OB Setting
■SettheOBforthepreviewandcapturerespectivelybydeningtheeffectivedataareaforthelowbrightnessconditionby
accurately judging the low signal level of the input signal.
<Adjustment method>
1. Save the applicable adjustment le to the microSD™ card.
2. Insert the microSD™ card with the program le saved and turn on the power of the camera.
3. Adjustment will automatically proceed.
 qCheck the Preview brightness value with the shutter closed and nd the OB value based on that setting.
 wRefer to the CARD WRITE information and save the Preview OB value result to the data le.
 eRefer to the EEPROM WRITE information and save the Preview adjusted value to EEPROM.
 rWith the shutter closed, check the Capture brightness value to nd the OB value based on that setting.
 tRefer to the CARD WRITE information and save the Capture OB value result to the data le.
 yRefer to the EEPROM WRITE information and save the Capture adjusted value to EEPROM.
 uChange the ISO and repeat the process from 4 to 6.
4. When the adjustment is completed, the camera will automatically be turned off.
<Adjustment result>
Open and check the CSV le created in the adjustment memory card.
5-3 Back Lash ADJ
<Adjustment method>
1. Save the applicable adjustment le to the microSD™ card.
2. After inserting the microSD™ card containing the program le, turn on the power of the camera.
3. The adjustment will automatically start.
qClose the body tube.
wAfter moving the body tube to Tele, calculate the error of PI count after it comes to Close.
eRepeat as many times as the count as above and obtain PI Count error sample to calculate the average.
r Judge whether the obtained average falls within the range of Max_backLash Range.
tPrepare the log le and move to Wide.
4. When the adjustment is completed, the camera will automatically be turned off.
<Adjustment result>
Open and check the CSV le generated from the adjustment memory card.
■ Calibrate the error that occurs when the direction of the lens change by each camera.