Samsung ST80 - Vertical Line ADJ

Adjustment
5-10 This Document can not be used without Samsung's authorization SAMSUNG
5-10 Vertical line ADJ
■ Because there is a deviation of CCD saturation level by each CCD, make adjustments to the basic analog gain to reduce this
deviation.
<Adjustment method>
1. Prepare the AE TESTER.
 *LuminancespecicationoftheLightboxis12LV.
* The Light box is located at 10mm+-1mm with the body tube open.
 *ThecolortemperaturespecicationoftheLightboxis3300K.
2. Save the applicable adjustment le to the microSD™ card.
3. After inserting the microSD™ card containing the program le to the camera, set the camera to the AE TESTER.
Fig. 5-6
4. Adjust the LV value of the AE METER to 12.
5. When you turn on the power of the camera, the adjustment will start automatically.
qTo do the compensation of vertical line, check the minium and maxium ratio of EVC and ISO
wCompare the checked information with basic information.(Record the real q’ty and rotio of vertical line)
eWrite the vertical line at the le.
6. When the adjustment is completed, the camera will automatically be turned off.
<Adjustment result>
Open and check the CSV le generated from the adjustment memory card.
<Restriction>
If the capacity of CSV le is more than 30KB, clear all of the previous data and then, record