Wireless network
105
Sending or receiving photos or videos with a camera
This feature uses an ad hoc wireless network.t
If you most recently used your camera to receive files, you must end t
the connection and reassign your camera as sender to send files.
The range of the wireless connection between two cameras may vary, t
depending on the conditions of the wireless ad-hoc network.
If a camera turns off abnormally while sending or receiving photos or t
videos, the other camera considers the camera to still be connected.
Cameras will be disconnected after some time.
It may take some time to send or receive photos or videos depending t
on the file size and the ad hoc network connection.
You can transfer files one by one.t
If you fail to receive or send a photo or video, it will not be saved on t
the receiving camera.
If no photos have been stored on the camera, you cannot use this t
feature.
You can send and receive photos or videos taken with your camera or t
other camera only.
If you select the original size in the allshare-image size setting, you can t
send or receive the photos without transformation. However, if you
select
and the selected photo resolution is higher than , it will
be automatically resized to a lower resolution. (p. 96)
You can send or receive videos smaller than 35 MB only.t
To Next Page
Loading...
