Shooting options
44
Using the timer
Pose for your photo while the AF-lamp/timer lamp is
5
blinking.
The AF-lamp/timer lamp will stop blinking just before the t
camera automatically takes a photo.
The motion timer may not work when:
you are more than 3 m away from the camerat
your movements are too subtlet
there is too much light or backlightt
the subject is close enough to reflect the AF lightt
Using the motion timer
In Shooting mode, select
1
.
Press [
2
Shutter].
Stand within 3 m from the camera within 6 seconds after
3
pressing [Shutter].
Make a motion, such as waving your arms, to activate
4
the timer.
The AF lamp/timer lamp will start to blink rapidly when the t
camera detects you.
The detection range of
the motion timer
To Next Page
Loading...
