Samsung SV-261GX User Manual

GB
25
Connecting an RCA Audio/Video Input Cable
★
(SV-665GX/SV-661GX Only)
Using the Assemble Edit Function
Recording from Another VCR or Camcorder
You can connect other audio/video equipment to your
VCR using audio/video cables if the appropriate
outputs are available on the equipment chosen.
Examples
:
◆ You wish to copy a video cassette with the help
of a second VCR.
◆ You wish to play back and/or copy pictures
taken with a camcorder.
☛ ◆ Make sure that both the television and the
VCR are switched off before connecting
the cables.
1 Connect one end of the RCA audio/video cable into
the VIDEO socket on the front of the VCR.
2 Plug the other end of the audio/video cable into the
appropriate output connector on the other system
(VCR or camcorder).
3 Connect one end of the RCA audio cable into the
AUDIO sockets on the front of the VCR.
➢ Take care to respect the colour coding of the
left and right channels.
4 Plug the other end of the audio cable into the
appropriate output connectors on the other system
(VCR, camcorder or Hi-Fi sound system).
You can copy a cassette to your VCR from another
video source, such as another VCR or a camcorder.
☛ It is an infringement of copyright laws to copy
prerecorded cassettes or to re-record them in
any form without the permission of the
owners of the corresponding copyright.
1 Connect the VCR, from which the cassette is to be
copied, to the appropriate SCART audio and video
input connectors on the rear of your VCR.
. You can also use an RCA audio and video cable to
connect the AUX input on the front of your VCR.
★
(SV-665GX/SV-661GX only)
2 Insert a blank cassette in your VCR.
3 Insert the pre-recorded cassette in the other video
source (VCR or camcorder).
4 Press the INPUT button to select the appropriate
input on your VCR:
◆ AV1 or AV2 for the SCART input
◆ AUX for the RCA input
★
(SV-665GX/ SV-661GX
only)
This function allows you to start a new recording at a
specific position on the cassette while maintaining a
very smooth scene change.
1 Insert the cassette to be edited in your VCR.
2 Press the ❿ll button to start playback.
3 When you reach the position from which you wish to
start the new recording, press the ❿ll button.
4 Press the F.ADV ( ) button again as often as
necessary to advance frame by frame, until the
exact recording position is located.
5 While the VCR is in still mode, hold the REC button
down for a while to activate the Assemble Edit
function.
Result: Record symbol flashes in the display.
6 Select the source from which you wish to record by
pressing:
◆ The PROG/TRK (  or ❷ ) / PROG (  or ❷ )
buttons for television channels
◆ The INPUT button for the AV1, AV2 or AUX
★
(SV-665GX/SV-661GX only) input sources
7 Press the ❿ll button to start recording.
8 When you have finished recording, press
■
.
F.ADV
5 Start playing back the cassette to be copied.
6 Hold REC down for a while to start recording on your
VCR.
7 When you have finished recording, press
■
on both
VCRs.
➢ If you wish to view the cassette being
copied:
◆ Your VCR must be connected as usual to
the television (see page 10 for further
details)
GB
24
Auto Repeat Play
ShowView EXTEND
★
(SV-665GX/
SV-465GX/SV-265GX
Only)
Using the Tape Counter
Interval Repeat Play
You can set interval repeat play to repeat the
cassette several times for special interval.
1 Press MENU on the remote control.
Result: The programming menu is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to
select the EASY OPERATION option.
3 Press the OK button to select this option.
Result: The EASY OPERATIONN menu is displayed.
4 Press the corresponding  or ❷ buttons, until the
NO. OF INTERVAL REPEAT option is selected.
5 To... Press ❿ , until...
Interval repeat play 5, 10, 15 is displayed.
(choose repeat time 5 times,
10 times, 15 times)
Cancel interval OFF is displayed.
repeat play
6 On completion, press MENU twice to exit the menu.
7 To select interval during playback, press the
INPUT/REPEAT button at the desired start point.
Result: “INTERVAL REPEAT SETTING” is
displayed.Press the INPUT/REPEAT button
one more time at the desired end point.
Result: The tape is automatically rewound to the start
point. “INTERVAL REPEAT” is displayed.
The tape counter:
◆ Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
◆ Is reset when a cassette is inserted in the VCR
◆ Allows you to find the beginning of a sequence easily
☛ If the remaining time is to be calculated correctly,
you must indicate the type of cassette being used.
1 Insert a cassette in your VCR.
2 To set the tape counter to zero at the beginning of a
sequence:
◆ Press DISP./ or DISPLAY twice to display the
counter
◆ Press CLR/RST when you want to set the tape
counter to zero
3 When you are ready,
◆ Start playback or Recording.
◆ Press the
■
button.
◆ To fast-froward or rewind to the sequence at
which the counter was set to zero, press
➛➛ or ❿❿ .
➢ Some VCR information, such as the counter, can
be displayed on the television screen (unless you
have deactivated the OSD mode; refer to page 16).
Press DISP./ or DISPLAY:
◆ Once to display the current function,
programme number, recording speed, date,
time and counter
◆ Twice to display the counter only
◆ Three times to display the time remaining
on the cassette
◆ Four times to clear the display
You can set repeat play to repeat the tape
continuously from beginning to end.
1 Press MENU on the remote control.
Result
: The programming menu is displayed.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to
select the
EASY OPERATION option.
3 Press the OK button to select this option.
Result
: The EASY OPERATION menu is displayed.
4 Press the corresponding  or ❷ buttons, until the
REPEAT PLAY option is selected.
5 To... Press ➛ or ❿ , until...
Repeat play ON is displayed.
Do not wish to repeat play OFF is displayed.
6 On completion, press MENU twice to exit the menu.
To prevent delays or over-runs the VCR has a
function called ShowView EXTEND allowing you to
extend the recording time by up to 60 minutes.
➢ Only use if PDC is not available or set to
OFF.
1 Press the MENU button on the remote control.
2 Press the corresponding  , ❷ or ➛ , ❿ buttons to
select the
EASY OPERATION option.
3 Press the OK button to select this option.
Result: The
EASY OPERATION menu is displayed.
4 Press the corresponding  or ❷ buttons, until the
SHOWVIEW EXTEND option is selected.
5 Press ➛ or ❿ buttons to set the ShowView EXTEND
time by increments of 10 minutes.
6 To turn off, press ➛ or ❿ buttons repeatedly until
OFF shows.

Samsung SV-261GX Specifications

General

Brand	Samsung
Model	SV-261GX
Category	VCR
Language	English