Install Manual
29
2.2.3 Remote control
All DVR unit features can be controlled with the remote controller; 16 units can be controlled
with a single remote controller. Unit IDs should be set in the DVR Menu > Communication >
Remote > Remocon ID.
No. Classification Function
1 ID Selects ID.
2 FUNC Starts function mode.
3 MULTI Changes split-screen
sections for live video or
playback.
4 STATUS Displays system setup
information.
5 MON Changes screen to spot
monitor.
6 DISP Selects split-screen and
channel options.
7 AUTO Switches to automatic
display.
8 ZOOM Executes digital zoom.
9 PIP Displays picture-in-picture.
10 PTZ Switches to PTZ mode.
11 Channel buttons Changes channels.
12 RECORD ( ) Starts and stops manual
recording.
13 +10 Uses for channels over 9
(e.g. "+10” + “1”)
14 FN1 Spare button 1.
15 FN2 Spare button 2.
16 MENU Switches to menu screen.
17 COPY Displays copy menu and
saves recorded video to
external storage device
(USB).
To Next Page
Loading...
